說明
資料紀錄
此資源出現紀錄的資料已發佈為達爾文核心集檔案（DwC-A），其以一或多組資料表構成分享生物多樣性資料的標準格式。 核心資料表包含 91 筆紀錄。
此 IPT 存放資料以提供資料儲存庫服務。資料與資源的詮釋資料可由「下載」單元下載。「版本」表格列出此資源的其它公開版本，以便利追蹤其隨時間的變更。
版本
以下的表格只顯示可公開存取資源的已發布版本。
權利
研究者應尊重以下權利聲明。:
此資料的發布者及權利單位為 The University Centre in Svalbard。 This work is licensed under a Creative Commons Attribution (CC-BY 4.0) License.
GBIF 註冊
此資源已向GBIF註冊，並指定以下之GBIF UUID: 41ec671b-f43d-43d2-8605-5e5ef620cc4e。 The University Centre in Svalbard 發佈此資源，並經由GBIF Norway同意向GBIF註冊成為資料發佈者。
關鍵字
Occurrence; Observation
聯絡資訊
- 出處
- 出處
- 出處
- 連絡人
- 連絡人
計畫資料
無相關描述
| 計畫名稱 | UNIS AB-202 |
|---|---|
| 辨識碼 | https://www.wikidata.org/wiki/Q118395664 |
參與計畫的人員:
取樣方法
On the boat Teisten, nets were hitched to a crane by a hook at the opening of the net and slowly lowered at 0,4 m/s, to not tangle the net. When the net had reached desired depth, it was again slowly hoisted at 0,5 m/s as to allow water time to pass through the small mesh and allow for collection of animals. While the net came out of the water it was sprayed with salt water to collect all the animals in the bottom of the net, where a container is attached. This container has a filter on one of its side surfaces that lets excess water out while retaining the animals caught inside. At the bottom of this container is a valve that allows for emptying of the contents. This is transferred into buckets, labeled with their location and mesh size. Measurements were taken between 15:10 to 16:49 (local time) as that was when the driver had set aside time to operate the boat. Day one / 09.04.2026: Teisten went out to S1 and used WP2 180µm and WP3 to collect biomass, microzooplankton and a community analysis. Average bottom depth was 61,2 as the boat was moved by waves, most samples were taken from 50 m depth. Day two/ 10.04.2026: Teisten went out to KB3 and used WP3 for collection of microzooplankton. Bottom depth was 350m and samples were done at 340 and 330 m. On the way back Polarsyssel was used to collect samples at KB3 using the WP2 180µm mesh. Bottom depth was at 350 and net was lowered to 300.
| 研究範圍 | Sampling location: Ny Ålesund, Kongsfjorden KB3 is a long term sampling station located in Kongsfjorden (78.95403 °N, 11.95853 °E) Station 1 is a sampling station located in Kongsfjorden (78.93639 °N, 11.91966 °E) Teisten (boat) was used 09.04.2026 - 10.04.2026 for taking samples at KB3 and Station 1. Polarsyssel (boat) was used on 14.04.2026 for sampling at KB3. |
|---|
方法步驟描述:
- On the boat Teisten, nets were hitched to a crane by a hook at the opening of the net and slowly lowered at 0,4 m/s, to not tangle the net. When the net had reached desired depth, it was again slowly hoisted at 0,5 m/s as to allow water time to pass through the small mesh and allow for collection of animals. While the net came out of the water it was sprayed with salt water to collect all the animals in the bottom of the net, where a container is attached. This container has a filter on one of its side surfaces that lets excess water out while retaining the animals caught inside. At the bottom of this container is a valve that allows for emptying of the contents. This is transferred into buckets, labeled with their location and mesh size. Measurements were taken between 15:10 to 16:49 (local time) as that was when the driver had set aside time to operate the boat. Day one / 09.04.2026: Teisten went out to S1 and used WP2 180µm and WP3 to collect biomass, microzooplankton and a community analysis. Average bottom depth was 61,2 as the boat was moved by waves, most samples were taken from 50 m depth. Day two/ 10.04.2026: Teisten went out to KB3 and used WP3 for collection of microzooplankton. Bottom depth was 350m and samples were done at 340 and 330 m. On the way back Polarsyssel was used to collect samples at KB3 using the WP2 180µm mesh. Bottom depth was at 350 and net was lowered to 300.