Descrição
Registros de Dados
Os dados deste recurso de ocorrência foram publicados como um Darwin Core Archive (DwC-A), que é o formato padronizado para compartilhamento de dados de biodiversidade como um conjunto de uma ou mais tabelas de dados. A tabela de dados do núcleo contém 91 registros.
This IPT archives the data and thus serves as the data repository. The data and resource metadata are available for download in the downloads section. The versions table lists other versions of the resource that have been made publicly available and allows tracking changes made to the resource over time.
Versões
A tabela abaixo mostra apenas versões de recursos que são publicamente acessíveis.
Direitos
Pesquisadores devem respeitar a seguinte declaração de direitos:
O editor e o detentor dos direitos deste trabalho é The University Centre in Svalbard. This work is licensed under a Creative Commons Attribution (CC-BY 4.0) License.
GBIF Registration
Este recurso foi registrado no GBIF e atribuído ao seguinte GBIF UUID: 41ec671b-f43d-43d2-8605-5e5ef620cc4e. The University Centre in Svalbard publica este recurso, e está registrado no GBIF como um publicador de dados aprovado por GBIF Norway.
Palavras-chave
Occurrence; Observation
Contatos
- Originador
- Originador
- Originador
- Ponto De Contato
- Ponto De Contato
Dados Sobre o Projeto
Nenhuma descrição disponível
| Título | UNIS AB-202 |
|---|---|
| Identificador | https://www.wikidata.org/wiki/Q118395664 |
O pessoal envolvido no projeto:
Métodos de Amostragem
On the boat Teisten, nets were hitched to a crane by a hook at the opening of the net and slowly lowered at 0,4 m/s, to not tangle the net. When the net had reached desired depth, it was again slowly hoisted at 0,5 m/s as to allow water time to pass through the small mesh and allow for collection of animals. While the net came out of the water it was sprayed with salt water to collect all the animals in the bottom of the net, where a container is attached. This container has a filter on one of its side surfaces that lets excess water out while retaining the animals caught inside. At the bottom of this container is a valve that allows for emptying of the contents. This is transferred into buckets, labeled with their location and mesh size. Measurements were taken between 15:10 to 16:49 (local time) as that was when the driver had set aside time to operate the boat. Day one / 09.04.2026: Teisten went out to S1 and used WP2 180µm and WP3 to collect biomass, microzooplankton and a community analysis. Average bottom depth was 61,2 as the boat was moved by waves, most samples were taken from 50 m depth. Day two/ 10.04.2026: Teisten went out to KB3 and used WP3 for collection of microzooplankton. Bottom depth was 350m and samples were done at 340 and 330 m. On the way back Polarsyssel was used to collect samples at KB3 using the WP2 180µm mesh. Bottom depth was at 350 and net was lowered to 300.
| Área de Estudo | Sampling location: Ny Ålesund, Kongsfjorden KB3 is a long term sampling station located in Kongsfjorden (78.95403 °N, 11.95853 °E) Station 1 is a sampling station located in Kongsfjorden (78.93639 °N, 11.91966 °E) Teisten (boat) was used 09.04.2026 - 10.04.2026 for taking samples at KB3 and Station 1. Polarsyssel (boat) was used on 14.04.2026 for sampling at KB3. |
|---|
Descrição dos passos do método:
- On the boat Teisten, nets were hitched to a crane by a hook at the opening of the net and slowly lowered at 0,4 m/s, to not tangle the net. When the net had reached desired depth, it was again slowly hoisted at 0,5 m/s as to allow water time to pass through the small mesh and allow for collection of animals. While the net came out of the water it was sprayed with salt water to collect all the animals in the bottom of the net, where a container is attached. This container has a filter on one of its side surfaces that lets excess water out while retaining the animals caught inside. At the bottom of this container is a valve that allows for emptying of the contents. This is transferred into buckets, labeled with their location and mesh size. Measurements were taken between 15:10 to 16:49 (local time) as that was when the driver had set aside time to operate the boat. Day one / 09.04.2026: Teisten went out to S1 and used WP2 180µm and WP3 to collect biomass, microzooplankton and a community analysis. Average bottom depth was 61,2 as the boat was moved by waves, most samples were taken from 50 m depth. Day two/ 10.04.2026: Teisten went out to KB3 and used WP3 for collection of microzooplankton. Bottom depth was 350m and samples were done at 340 and 330 m. On the way back Polarsyssel was used to collect samples at KB3 using the WP2 180µm mesh. Bottom depth was at 350 and net was lowered to 300.
Metadados Adicionais
| Identificadores alternativos | https://ipt.gbif.no/resource?r=unis-ab202-2026-zooplankton |
|---|